BTSWT - MIL-P-24441/1 F150A COMP 24272
- MSDS: BTSWT
- Manufacturer: SEAGRAVE COATINGS CORP OF VA
- Product Name: MIL-P-24441/1 F150A COMP 24272
- National Stock Number: 8010-00-437-6757
Product Identification
Product ID:MIL-P-24441/1 F150A COMP 24272
MSDS Date:10/16/1990
FSC:8010
NIIN:00-437-6757
Kit Part:Y
MSDS Number: BTSWT
Responsible Party
PORTSMOUTH, VA 23701
US
Emergency Phone: 804-488-4411/800-424-9300 CHERMTREC
Info Phone: 804-488-4411
Cage: 60163
Contractor
Telephone: 757-397-2223
Cage: 60163
Ingredients
TITANIUM DIOXIDE
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 10%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9394
IRON OXIDE
CAS: 1309-37-1
RTECS: NO7400000
Fraction By Weight: 5 - 10%
OSHA PEL 10 MG/M3 (FE)
ACGIH TLV: 5MG(FE)/M3FUME,B2;94
TALC (CONTAINING ASBESTOS)
CAS: 14807-96-6
RTECS: MW2700000
Fraction By Weight: 35-45%
OSHA PEL 0.2 FIBERS/CC
ACGIH TLV: 0.2 FIBERS/CC; 9394
SILICA, CRYSTALLINE - QUARTZ
CAS: 14808-60-7
RTECS: VV7330000
Fraction By Weight: 10%
OSHA PEL 10 MG/M3 RDUST; Z-3
ACGIH TLV: 0.1 MG/M3 RDUST;9394
N-BUTYL ALCOHOL (SARA III)
CAS: 71-36-3
RTECS: EO1400000
Fraction By Weight: 25.48%
OSHA PEL 100 PPM
ACGIH TLV: S, C 50 PPM; 9394
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
AMIDO-AMINE-RESIN
CAS: 68443-08-3
Fraction By Weight: 5%
POLYAMIDE RESIN
Fraction By Weight: 25%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN CONTACT-PRIMARY IRRITATION. SKIN
CONTACT-PRIMARY IRRITATION.
Explanation of Carcinogenicity:NOT CARCINOGENIC.
Effects of Overexposure:INHALATION-IRRITATION TO RESPIRATORY TRACT,
HEADACHE, DIZZINESS, AND NAUSEA.
Medical Cond Aggravated by Exposure:PRE-EXISTING SENSITIVITY TO
SOLVENTS CAN CAUSE A HEIGHTENED REACTION TO EXPOSURE TO THIS
PRODUCT.
First Aid
First Aid:INHALATION-REMOVE TO FRESH AIR, RESTORE BREATHING. CONSULT A
PHYSICIAN. SKIN CONTACT-FLUSH WITH WATER. EYE CONTACT-FLUSH
IMMEDIATELY WITH LARGE AMOUNTS OF WATER. CONSULT A PHYSICIAN.
Fire Fighting
Flash Point Method:TCC
Flash Point:99.0F,37.2C
Lower Limits:1.4
Upper Limits:11.2
Extinguishing Media:WATER FOG, DRY CHEMICAL, FOAM, ALCOHOL, CARBON
DIOXIDE.
Fire Fighting Procedures:WATER MAY BE USED TO COOL CLOSED CONTAINERS TO
PREVENT PRESSURE BUILDUP AND POSSIBLE AUTOIGNITION OR EXPLOSION
WHEN EXPOSED TO EXTREME HEAT.
Unusual Fire/Explosion Hazard:ISOLATE FROM HEAT, SPARKS AND OPEN
FLAMES. CLOSED CONTAINERS MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:AVOID BREATHING SOLVENT VAPOR. ENSURE ADEQUATE
VENTILATION. AVOID SPARKS, FLAMES, ANYTHING WHICH COULD CAUSE FIRE.
Handling
Handling and Storage Precautions:STORE IN COOL DRY AREA WITH
VENTILATION SUITABLE FOR STORING MATERIALS SHOWN IN INGREDIENTS
SECTION.
Other Precautions:PROVIDE RESPIRATORY PROTECTION AGAINST FUMES
GENERATED DURING BURNING.
Exposure Controls
Respiratory Protection:NIOSH/OSHA APPROVED RESPIRATOR TYPES SUITABLE
FOR MATERIALS IN INGREDIENTS SECTION RECOMMENDED. APPROVED
CHEMICAL/MECHANICAL FILTERS RECOMMENDED WHEN VENTILATION IS
RESTRICTED. APPROVED AIRLINE TYPE R ESPIRATOR OR HOODS RECOMMENDED.
Ventilation:SUFFICIENT VENTILATION, IN VOLUME & PATTERN, SHOULD BE
PROVIDED TO KEEP AIR CONTAMINATION BELOW CURRENT PEL OR TLV'S.
Protective Gloves:RECOMMENDED FOR PROLONGED CONTACT.
Eye Protection:CHEMICAL GOGGLES WITH SIDE SHIELDS.
Other Protective Equipment:USE PROTECTIVE CREAMS WHER SKIN CONTACT IS
LIKELY. REMOVE AND WASH CONTAMINATED CLOTHING BEFORE REUSE.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR SMOKING. SMOKE IN
DESIGNATED AREAS ONLY.
Supplemental Safety and Health
NONE.
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:244F,118C
Vapor Density:>AIR
Spec Gravity:11.9
Evaporation Rate & Reference:IS SLOWER THAN ETHER
Solubility in Water:INSOLUBLE
Appearance and Odor:GREEN LIQUID. BUTYL ALCOHOL ODOR.
Percent Volatiles by Volume:48.1
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS CAN CAUSE A VIGOROUS REACTION.
Stability Condition to Avoid:THIS PRODUCT STABLE UNDER NORMAL STORGAE
CONDITIONS.
Hazardous Decomposition Products:AS WITH ANT OTHER ORGANIC MATERIAL,
COMBUSTION WILL PRODUCE CARBON DIOXIDE AND PROBABLY CARBON
MONOXIDE.
Conditions to Avoid Polymerization:COULD OCCUR UNDER NORMAL CONDITIONS.
CARE MUST BE EXERCISED.
Disposal
Waste Disposal Methods:SOAK LIQUIDS WITH SAWDUST OR RAGS AND REMOVE.
FLUSH WITH WATER IF POSSIBLE. AVOID SKIN CONTACT. DISPOSAL SHOULD
BE IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.